Shed Prices in Australia (2025): Real Price List, Kit vs Custom, Regional Factors

Quick Shed Price List (Australia-wide)

Below are 2025 indicative Colorbond shed prices for popular sizes and use-cases. Figures include engineering for Australian Standards but exclude slab/footings unless noted. Cyclone upgrades, coastal corrosion protection, and remote freight can add 10–35%.

Shed Type / Size	Typical Use	Kit Price From (AUD)	Turnkey Installed From (AUD)	Notes
3m x 3m garden shed	Garden storage	$1,200–$2,200	$2,800–$5,500	Non-habitable; slab extra
6m x 6m single garage	Car + storage	$6,500–$12,000	$14,000–$28,000	Roller door, PA door
6m x 9m shed / 6×9 garage	Double car + workshop	$8,500–$14,000	$18,000–$35,000	Very popular size
7.5m x 9m (3-bay shed)	3 bay shed with bays ~2.5m	$12,000–$20,000	$26,000–$50,000	Rural sheds NSW/VIC
9m x 9m (Large garage)	Vehicles + storage	$16,000–$28,000	$35,000–$70,000	Engineering to AS/NZS 1170
12m x 12m shed	Farm machinery storage	$22,000–$45,000	$55,000–$110,000	Colorbond or Zincalume cladding
10m x 20m shed	Commercial/industrial workshop	$35,000–$75,000	$80,000–$160,000	Portal frame; fire services may apply
4 bay shed (e.g., 12m x 7.5m)	Multi-vehicle rural	$18,000–$32,000	$40,000–$85,000	4 bay shed price Australia varies by region
4 bay shed with awning (+3m)	Weather-protected work area	+ $4,000–$10,000 on kit	+ $8,000–$20,000 installed	Great for utes/boats
Colorbond carport 6m x 6m	Double carport	$3,800–$7,500	$8,500–$16,000	Custom carports Melbourne/Brisbane

Looking for a simple shed catalogue with prices? Use the table above as a live “price list”. For a firm quote, request your wind region, terrain category, and corrosion category at checkout.

How much does a 6m x 9m shed cost in Australia?

A 6×9 shed price typically starts from $8,500–$14,000 for a DIY shed kit, and from $18,000–$35,000 fully installed, excluding slab. In cyclonic parts of QLD (Region C/D), allow 15–35% more for cyclone-rated sheds QLD due to heavier frames, hold-downs and cladding.

6×9 garden shed (light-duty): from $6,500 kit in Zincalume.
6×9 garage shed (double roller doors, PA door, windows): $10,000–$16,000 kit; $22,000–$38,000 installed.
6×9 shed prices in Brisbane (Region B): usually mid-range of the above; in coastal North QLD (Region C), add 20–30%.

What drives shed cost in Australia?

Shed cost is not just the size. Engineering for local wind loads, site conditions, and specs can swing prices by tens of percent.

Quick definitions

Wind Region: AS/NZS 1170.2 classification (A, B, C, D). Region C/D = cyclonic design.
Terrain Category: Surrounding exposure (e.g., TC2 suburban, TC1.5 open). Higher exposure = stronger shed required.
Importance Level: Building use significance. IL2 typical for garages/workshops.
Corrosion Category: Coastal/industrial corrosion risk (e.g., C3–C5). Drives coating choice and fasteners.

Key price factors

Wind rating and hold-downs: cyclone-rated designs add heavier portals, extra bracing and screw patterns.
Cladding choice: Colorbond vs Zincalume; 0.42 TCT vs 0.48 TCT; 0.55 BMT flashings.
Frame system: Cold-formed C-purlins, UB/UC columns, hot-dip galvanised connection plates.
Doors and openings: Roller/sectional doors, wind-locked rollers in high wind areas, motorisation.
Thermal/comfort: Anticon blanket, roof insulation (R2.5–R3.6), ventilators, insulated panels.
Site and slab: Cut/fill, piers vs full slab, thickening for posts, termite and vermin flashing.
Delivery and access: Remote WA/QLD/TAS freight, crane or telehandler hire, tight sites.
Compliance: NCC 2022, AS/NZS 1170 series, BAL ratings in bushfire areas, cyclone tie-down schedules.

What Are the Best Shed Materials for Perth’s Climate?

Perth’s hot summers and coastal air make heat reflectance and corrosion resistance key. Many steel sheds Perth owners choose Colorbond cladding with Thermatech technology for cooler interiors and better longevity near the coast. Zincalume is cost-effective inland.

Colorbond vs Zincalume — Which Is Better for WA Conditions?

Criteria	Colorbond	Zincalume
Upfront cost	$$ (higher)	$ (lower)
Heat reflectance	High (light colours reflect more)	Good (natural reflectance)
Coastal durability	Better with correct grade and maintenance	Good inland; limit near surf coasts
Aesthetics	Colour range (Monument, Surfmist, Basalt, etc.)	Silver/grey metallic
Resale appeal	High for premium homes	Moderate (functional)

Pro Tip: Did you know using insulated roof panels or Anticon blanket can reduce internal shed temperatures by up to 10°C in summer? This improves occupant comfort for workshops and reduces cooling energy needs (Energy.gov.au).

DIY Shed Kit vs Custom-Built: Which Is Cheaper Long-Term?

DIY shed kits are the cheapest entry point. Custom-built and council-approved sheds WA, VIC, NSW and QLD offer a smoother process and often better lifetime value if you need specific doors, awnings, or compliance.

Aspect	DIY Shed Kits	Custom-Built (Turnkey)
Price	Lowest upfront	Higher upfront
Time	Owner-managed; weekends	Builder-managed; faster delivery
Engineering	Standard kits; upgrades available	Tailored to site (wind, terrain, BAL)
Warranty	Product warranty	Workmanship + product warranty
Risk	DIY errors, rework, approval delays	Lower risk; one accountable party

Roof Types Compared: Gable vs Skillion vs Flat

Roof	Pros	Cons	Best for
Gable	Classic look, good drainage, spans well	Taller ridge, watch ridge height limits	Garages, rural sheds, 3–4 bay shed
Skillion	Modern look, easy solar orientation	Lower eave may reduce clearance	Custom Colorbond garages Perth, carports
Flat	Low profile, height-restricted sites	Needs careful drainage, fall and gutters	Affordable carports for Australian homes

How to Get Council Approval for Your Custom Shed in WA

Added 2024 WA wind-rating compliance notes

Steps

Check R-Codes and local planning: Setbacks, site coverage, height. Ask for your wind region (usually A or B in Perth metro).
Engineering: Ensure drawings are to AS/NZS 1170.2 (wind), AS 4100/AS 4600 (steel), NCC 2022. Include tie-down schedule and slab/footing design.
Documentation: Site plan, elevations, engineering certificate, colour schedule (if required), neighbour consultation (if near boundary).
Apply: Building Permit (BA1) via your builder or certifier. For minor structures, a Building Approval Certificate may apply in some cases.
Inspection and compliance: Slab and frame inspections as required; obtain occupancy/ completion documentation.

Other states: QLD requires cyclone compliance in Regions C/D; NSW/VIC councils focus on setbacks, stormwater, bushfire (BAL). For regional wind maps and weather data see the Bureau of Meteorology.

5-Step Buying Guide for Custom Sheds in Australia

Define use-case: farm machinery storage, workshop, boat/van, or custom carports Melbourne/Brisbane.
Confirm site parameters: wind region, terrain category, BAL, corrosion category, access for delivery.
Choose materials: Colorbond for premium homes and coastal, Zincalume inland; add insulation if occupied.
Lock specs: bay spacing, door sizes, 4 bay shed with awning or lean-to, gutters/downpipes, vermin flashing.
Approval and delivery: engage a council-savvy supplier; book slab, erection crew, and electrical fit-out.

Regional Price Snapshots

Shed prices QLD

Brisbane/SE QLD (Region B): near national averages.
North QLD (Region C/D): cyclone-rated sheds QLD add 15–35% on kit price; wind-locked rollers recommended.
Shed kit prices QLD: allow extra for cyclonic engineering and delivery to regional towns.

Shed prices NSW and ACT

Rural sheds NSW: competitive; watch snow/wind in highlands.
Metros (Sydney, Newcastle, Wollongong): higher install labour, traffic management.

Shed prices Victoria

Melbourne: strong demand for custom garages and carports; BAL zones on fringes can add cost.
Regional VIC: good value; check frost/snow in Alpine regions.

Sheds Adelaide prices (SA)

Generally slightly below national averages; coastal corrosion (C3–C4) influences coating choice.

Kit sheds Tasmania prices

Freight adds 8–15%; snow loads in highlands. Zincalume popular inland; Colorbond coastal.

Shed prices WA (Perth & regional)

Perth metro: competitive for steel sheds Perth; Colorbond shed prices vary with colour/finish.
Regional WA: allow for long-haul freight; higher wind in coastal exposures.

Case Studies and Build Examples

1) 6×9 double garage, Brisbane (Region B)

Spec: Gable roof, two 2.7m wind-locked roller doors, PA door, Anticon 60 blanket.
Kit: $12,600; Slab: $6,900; Install: $8,200; Electrical: $1,800.
Total: ~$29,500 inc GST. Council approved in 3 weeks.

2) 12m x 12m farm machinery shed, regional NSW

Spec: 3 x 4m bays, 5m eave height, open front, Zincalume cladding, vermin flashing.
Kit: $27,800; Piers/slab strips: $9,800; Erection: $12,000.
Total: ~$49,600 inc GST. Delivered in 4 weeks.

3) 4 bay shed with 3m awning, Perth (Region A)

Spec: 12m x 7.5m + 3m awning, Colorbond Monument, motorised roller door bay, skylights.
Kit: $31,900 (incl awning); Slab: $11,500; Install: $16,400.
Total: ~$59,800 inc GST. Includes WA wind-rating compliance.

FAQs

Do shed prices include the slab?

Usually no. Your shed price list will show the steel kit separately. Slab/footings depend on soil class, thickness, and thickenings under posts.

Are Colorbond shed prices worth it vs Zincalume?

For premium homes and coastal suburbs, yes—better aesthetics and durability. For budget rural builds inland, Zincalume is excellent value. See comparison above.

How long are 2025 lead times?

Typical: 3–6 weeks for kits; 6–12 weeks for turnkey, subject to council and crew availability. Check current steel supply via the Australian Steel Institute’s market updates.

What wind rating do I need?

It depends on your location (Region A/B/C/D) and terrain. Your engineer will design to AS/NZS 1170.2. Cyclone regions require specific detailing.

Can I buy shed kit prices online?

Yes—many suppliers list live kit sheds for sale with online configurators. Always verify wind region and include freight and approvals in your budget.

Garage shed prices vs carports?

Carports are cheaper per square metre. Enclosed garages add walls, doors, wind bracing and compliance—higher upfront, better security and weather protection.

Standards, Climate and Industry Sources

Specifications should reference AS/NZS 1170 (actions on structures), AS 4100/AS 4600 (steel design), and local council planning codes.

Get Your Fixed-Price Quote

Send us your size (e.g., 6×9, 12×12, 10×20), site address, wind region and preferred cladding (Colorbond or Zincalume). We’ll return a council-ready, engineered price including optional slab and installation.