Caravan Repairs Wangara WA | Servicing, Insurance Repairs & Caravan Sheds Perth
What caravan repair and service work do we handle in Wangara?
From quick fixes to insurance rebuilds, our Wangara workshop handles:
- Full caravan service Perth: bearings, brakes (electric/hydraulic), hubs, suspension, coupling, breakaway, chassis checks
- 12V electrics: DC-DC chargers, solar, lithium battery systems, MPPT controllers, LED lighting, AL-KO ESC calibration
- Water ingress and reseals: hatches, windows, roof seams, shower modules, skylights
- Appliances & gas (with licensed gasfitters): fridges, hot water services, cooktops, regulators and leak tests
- Awnings and annexes: roll-out awning replacement, anti-flap kits, wall repairs
- Accident and hail damage: panel repair (aluminium/fibreglass), structural checks, insurance quotes and repairs
- Running gear upgrades: shock absorbers, off-road suspension, GVM/brake system upgrades (where compliant)
- Tow setup: weight distribution hitch setup, tow ball height, brake controller tuning, safety chain and pin checks
Related services: camper trailer repairs Perth, RV repairs Perth, trailer brake rewires, LED compliance upgrades, pre-trip and pre-purchase inspections.
How often should you service your caravan in Perth?
WA road trips are long and hot. We recommend:
- Bearings and brakes: every 10,000 km or 12 months (whichever comes first)
- Chassis and suspension: visual check each trip; full inspection annually
- 12V and charging: test before long trips; load-test batteries annually
- Seals and roof joints: inspect after heavy rain and at least every 6–12 months
Need somewhere to store your van? Custom caravan sheds and carports in Perth
Protecting your van from Perth’s UV and summer heat can save thousands in reseals, paint fade and roof membrane repairs. We design and install Colorbond steel sheds, custom Colorbond garages Perth, and caravan carports sized for high-clearance vans with air-cons and solar.
What are the best shed materials for Perth’s climate?
Perth is hot, dry and coastal. Materials must handle UV, thermal movement and salt-laden air. Here’s a quick comparison of Colorbond vs Zincalume for caravan sheds.
Colorbond vs Zincalume — Which Is Better for WA Conditions?
| Feature | Colorbond Steel | Zincalume Steel |
|---|---|---|
| Coating | Painted, baked-on finish over metallic coating | Aluminium-zinc alloy (AZ150) |
| Coastal performance | Choose Colorbond Ultra/Marine near surf coasts | Good, but can dull faster near coast |
| Heat & UV | Reflective colours; resists chalking/fade | Reflective but unpainted; can weather |
| Appearance | Wide colour range (Match home/estate covenants) | Silver-grey metallic look |
| Maintenance | Low; hose-down in coastal zones | Low; hose-down in coastal zones |
| Best for | Premium look, coastal suburbs, urban streetscapes | Budget-friendly rural/industrial looks |
Added 2024 WA wind-rating compliance notes — Perth is typically NCC Wind Region A (non-cyclonic). We design to AS/NZS 1170.2 wind loads with terrain category and shielding accounted for. Coastal and hilltop sites may require higher tie-down and footing design.
How to get council approval for your custom shed in WA
- Check R-Codes and local planning overlays for height, setbacks and streetscape rules
- Obtain site plan, elevations and structural engineering to AS/NZS 1170.2, AS 4100/AS/NZS 4600
- Submit Building Permit (BA2 or BA1) to your local council or a private certifier
- Arrange slab engineering (typ. 100–120 mm with SL72 mesh; site-specific)
- Book inspections as required and obtain occupancy/completion documentation
We supply council-approved sheds WA with full documentation and footing details to suit your soil class and wind region.
Caravan shelter options: carports vs enclosed garages
- High-clearance caravan carports (skillion or gable) with deep gutters and oversize downpipes
- Custom-built double garage in Perth with 3.0–3.6 m clearance and 2.7–3.3 m wide roller doors
- Drive-through bays for vans and boat trailers
- Coastal spec: Colorbond Ultra, stainless fixings, and extra wash-down taps
Case studies: Wangara repairs and Perth North installations
Wangara — Full service and awning replacement
A 21’ touring van presented with brake shudder and a torn awning. We replaced bearings and brake shoes, machined drums, resealed two roof penetrations, and installed a new roll-out awning. The owner booked a pre-trip inspection and 12V battery health check before a Coral Bay run.
Joondalup — 9 x 4 m caravan carport (Colorbond)
We designed a 9 x 4 m skillion carport at 3.3 m underside clearance with Colorbond Ultra, engineered to AS/NZS 1170.2 Region A. The build included a 120 mm slab with thickened edges, sarking for heat reduction and conduit for future EV/tow vehicle charging.
5-Step Buying Guide for Custom Sheds in Australia
- Measure your caravan fully loaded (A/C, solar, bikes) and allow 200–300 mm extra height
- Choose material grade (Colorbond Ultra near surf; standard Colorbond/Zincalume inland)
- Select roof form (skillion for solar, gable for ventilation); confirm wind rating and tie-downs
- Decide on slab vs piers; confirm drainage, gutters and stormwater connection
- Confirm council pathway, lead times, and warranty (coatings, structure, workmanship)
Technical standards and compliance we follow in WA
- NCC (BCA) and AS/NZS 1170.2 wind actions for non-cyclonic Region A (Perth metro)
- AS 4100 (steel structures), AS/NZS 4600 (cold-formed steel), AS 1397 (steel sheet)
- Electrical and solar by licensed sparkies; gas by licensed gasfitters
- Stormwater sized for local Bureau of Meteorology rainfall Intensity–Frequency–Duration data
For cyclone zones, we also design wind-rated sheds for cyclonic areas and supply cyclone-rated sheds QLD through our partner network.
FAQs — Caravan repairs Wangara and Perth caravan sheds
How much does a caravan service cost in Perth?
Indicative only: bearing and brake service from $380–$650 per axle depending on parts and condition. Full service with reseals and checks can vary—book a quote after inspection.
Do you do insurance repairs?
Yes, we handle quotes, photos and repair scopes for major insurers. Hail, impact, awning, panel and water ingress repairs are common claims.
Can you fit solar and lithium systems?
Yes—DC-DC chargers, MPPT controllers, lithium cells, monitoring, and mains charging integration, set up for WA touring.
Do I need council approval for a caravan carport?
Most fixed carports/garages require a Building Permit and may require planning approval. We supply drawings, engineering and lodge applications as needed.
What’s the turnaround time?
Minor repairs: 1–3 days; insurance and structural repairs: 2–6 weeks depending on parts and approvals. Sheds: allow 2–6 weeks for approvals and 1–3 days install after slab cure.
Do you offer mobile caravan service Perth?
Workshop service is preferred for safety and tooling. Mobile triage may be possible by arrangement for non-structural checks.
How do I prepare my van for a service?
Empty water tanks, remove valuables, provide your wheel lock key, and note any fault lights, leaks or noises you’ve noticed.
Why choose us for Perth caravan repairs and sheds?
- One-stop shop: caravan repairs Wangara WA and Perth caravan repairs with in-house shed/carport design
- Genuine parts, qualified technicians and licensed trades
- Engineered, council-approved sheds WA with warranties and aftercare
- Local knowledge: Perth heat, sea breeze corrosion, and wind design rules
Also ask about custom Colorbond garages Perth, DIY shed kits, farm machinery storage, affordable carports for Australian homes and rural sheds. We service WA clients and provide design guidance learned across Australia—from steel sheds Perth to rural sheds NSW and custom carports Melbourne.